How To Flashing Android Phone Using SP Flashtool (Mediatek Chipset)


SP Flash tool is a tools for flashing your android phone that using mediatek chipset. Whether you want to upgrade, downgrade or save your phone from bootloop or brick. SP Flash tool come in several format for windows and linux. It is support all architecture of your Operating System.


 There are many conditions that make us flashing our android phone, I will mention some of it :
  • Bootloop; means it cannot loading to Operating System, usually stuck in logo, blank only vibra, or stuck to download mode, or maybe for some phone it is locked by FRP factory, 
  • Attacked by malware, even if you perform factory reset that makes it run slow and hang,H 
  • Brick; means no respond, u cannot feel the vibra or see the picture loaded, 
  • Firmware upgrade or downgrade, sometime we need to do that, 
  • You want to root it, or install the custom ROM from unknown developer, or boost your android phone perform. 

 For begin Flashing you need to prepare this stuff instantly, I only talk about Mediatek Chipset Phone here :
  • Computer or Laptop
  • To detect your android phone, get the mediatek USB driver here>>>
  • Firmware specific to you phone model, for example lenovo A-7000, get the firmware here>>>
  • Data Cable, pick the good one, means high percentage of success,
  • Last, you need SP FlashTool. get the latest SP Flash Tools here>>>

Generally, Flashing with SP Flash Tools is handy, look up the Steps below :
  1. Get The SP FlashTool you downloaded, and extract it, then inside the folder find the "sp-flashtool" it is an apps file, click it, no need to install.
  2. But before that I assume you already install USB mediatek driver and USB V-Com driver first
    at you computer,
  3. Choose Scatter loading, and take it to directory of your firmware folder, find the file "Android Scatter" then it will processed,
  4. Next, click on download,
  5. Prepare your phone, turn it of first,
  6. Then plug the USB cable in while you press Volume Down, remember "Volume Down"
  7. Wait till red lines show up at the bottom or SP Flash Tools, it means our phone detected,
  8. Then the installation will running, wait till finisih,
  9. When you have green checklist appear at the screen, then your process is done.
Here is The Process Inserting your Firmware, look up the Scatter Loading File
Here is When The Process Finish and Success, You Will Have The Green Checklist
Langganan: Postingan (Atom)