 |
| Samsung S7 and S7 Edge Flashing Tutorial |
Not any bootloop case in cellphone can be solved by flashing, sometimes it works, but sometimes dont. Sometimes the room doesn't fit the hardware, some case the EMMC IC were broken. I will give you the tutorial how to flash Samsung S7/Edge phone,,check out.
You have to download the tools and files for flashing your Samsung Galaxy S7 / edge :
- PC/Laptop, the OS should be Windows, windows 10 64-bit are better,
- Data Cable, choose the good quality one,
- Flashtool, you could use Odin Flash Tools for Samsung phone, download here>>>
- Samsung USB Driver, you can download it here>>>
- Suitable firmware,,for Samsung Galaxy S7 / Edge can be downloaded here>>>
NOTE BEFORE FLASHING :
- Make sure your ROM or firmware suit your cellphone,
- Make sure that the battery is in full charging, or minimum 50%,
- Make sure to backup your data before flashing, cause it will wiped out.
After make the preparation, please follow the instruction below :
1. Turn off your Phone, then go to download mode by pressing and hold button volume down(-) + home + volume up(+) at the same time. After WARNING SHOW UP, press volume up to continue to download mode,
2. Open Odin Flash Tools, run as administrator,
3. Next step, connect cellphone to computer/laptop using USB cable. If Detected, in Odin column ID:COM will turn to be blue, and will show you command 'Added',
4. Next in Odin, click AP box to inserting firmware file with extention MD5 from folder where you keep samsung S7 / Edge folder you have downloaded,
5. After firmware loaded to Odin, you can start flashing by clicking start, do not disconnect your cellphone while flashing run, and wait till finish.
6. Finish, you will be returned to homescreen and setup your Samsung S7 / Edge Cellphone.
